年份: 2016

Notice of change of company name and registered capital
Notice of change of company name and registered capital

Considering the development needs of the company, our company name was changed from “Changzhou Junhua Special Engineering Plastic Products Co., Ltd.” to “Jiangsu Junhua Special Engineering Plastic Products Co., Ltd.”. The registered capital was increased from 500,000 to 10 million. The company’s contact information, office address, business relationships and service commitments remain unchanged. We sincerely thank you for your consistent support and care for our company. We will continue to maintain a pleasant cooperative relationship with your company and hope to continue to receive your care and support! Best regards! Jiangsu Junhua Special Engineering Plastic Products Co., Ltd. December 5, 2014

2016-09-01 | Company News, News | Tags:

Thermoplastic polyimide (PI) rods were successfully extruded continuously
Thermoplastic polyimide (PI) rods were successfully extruded continuously

Polyimide (PI) has excellent resistance to high temperature, low temperature, solvent, radiation, and outstanding mechanical strength and dielectric properties. It has been widely used in many high-tech fields such as aerospace, aviation, automobiles, electronic semiconductors, welding and cutting, and electrical appliances. However, the difficulty in processing and high manufacturing costs of polyimide (PI) have always been two key factors restricting its rapid development. Research and development of melt-processable thermoplastic polyimide (PI) is one of the main methods to enable it to have processing and molding properties and reduce manufacturing costs. Thermoplastic polyimide (PI) not only retains the characteristics of traditional thermosetting PI, but also improves processability. In addition to hot compression molding, it can also be molded by extrusion or…

2016-09-01 | Company News, News | Tags:

Junhua PEEK successfully continuously extrudes PPSU rods
Junhua PEEK successfully continuously extrudes PPSU rods

Jiangsu Junhua Special Engineering Plastic Products Co., Ltd. successfully continuously extruded PPSU rods. PPSU, scientific name for polyphenylene sulfone resins, is an amorphous high-performance thermoplastic. PPSU is a safe material that does not contain endocrine disrupting carcinogenic chemicals (environmental hormones: bisphenol A). It has good rigidity and toughness, is heat-resistant, heat-resistant and oxidatively resistant, has excellent creep resistance, is resistant to corrosion by inorganic acids, alkalis, and salt solutions, is resistant to ion radiation, is non-toxic, has good insulation and self-extinguishing properties, and is easy to mold and process. PPSU is now widely used in food processing machinery, medical equipment, electronic and electrical industry, chemical processing and other fields. Such as: PPSU integrated circuit board, PPSU coil tube rack, PPSU…

2016-09-01 | Company News, News | Tags:

Junhua PEEK PEEK passed the US FDA food grade certification test

On May 29, 2015, Junhua PEEK PEEK passed the US FDA food grade certification test of the US NSF (National Sanitation Foundation: an authoritative organization in the field of public health and safety). Why do we need FDA food grade certification The high-performance plastic parts of PEEK (polyetheretherketone) polymer and its composite materials developed by our company have been widely used in food processing machinery and are food contact materials. The test results can be used for customs clearance of products exported to the United States, and can also be submitted when the FDA may inspect production facilities. (Food contact materials refer to all materials that can come into contact with food during the processing, production, packaging, storage and transportation…

2016-09-01 | Company News, News | Tags:

Jiangsu Junhua: We do what others cannot do
Jiangsu Junhua: We do what others cannot do

At this rubber and plastics exhibition, Jiangsu Junhua Special Engineering Plastics Products Co., Ltd. exhibited many different brands of high-performance plates, rods, segments and other profiles, which attracted the attention of many merchants. Junhua PEEK is a domestic manufacturer of PEEK plates, rods, tubes, sheets and other profiles and finished parts. The company’s products have been widely used in the fields of automobiles, electronic semiconductors, textile printing and dyeing machinery, packaging machinery, medical equipment, and petrochemical machinery. Li Jun, general manager of Jiangsu Junhua Special Engineering Plastic Products Co., Ltd., said that the PEEK material produced by the company has the properties of high temperature resistance, high strength, self-lubrication, wear resistance, hydrolysis resistance, and corrosion resistance, and the electrical properties…

2016-09-01 | Company News, News | Tags:

Junhua PEEK passed the national high-tech enterprise certification
Junhua PEEK passed the national high-tech enterprise certification

Recently, our company received a notice from the Wujin Science and Technology Bureau of Jiangsu Province: According to the relevant provisions of the “High-tech Enterprise Recognition Management Measures” and “High-tech Enterprise Recognition Management Guidelines” of the Ministry of Science and Technology, the Ministry of Finance, and the State Administration of Taxation, after successful application and review, Jiangsu Junhua Special Engineering Plastic Products Co., Ltd. was officially recognized as a high-tech enterprise. The high-tech enterprise certification is jointly established by the Ministry of Science and Technology, the Ministry of Finance, and the State Administration of Taxation. The purpose is to standardize and unify the national certification of enterprise qualifications. The certification threshold for high-tech enterprises is much higher than that of…

2016-09-01 | Company News, News | Tags:

Junhua PEEK PEEK passed the US FDA food grade certification test
Junhua PEEK PEEK passed the US FDA food grade certification test

On August 16, 2018, Junhua PEEK PEEK passed the food grade certification test of the U.S. Food and Drug Administration (FDA).   What is the FDA FDA is the abbreviation of the U.S. Food and Drug Administration. It is one of the executive agencies established by the U.S. government in the Health and Human Services and Public Health Stations. Internationally, FDA is recognized as the world’s food and drug administration agency. Many other countries promote and monitor the safety of their own products by seeking and accepting the help of FDA.   The high-performance plastic parts of PEEK polymers and their composite materials developed by our company have been widely used in food processing, pharmaceuticals, medical devices (non-implant grade) and…

2016-09-01 | Company News, News | Tags:

Celanese thermoplastic composite wire can replace metal materials

  Celanese Corp. and U.S. wire and cable maker Southwire Co. LLC have developed an overhead transmission line made of thermoplastic composites to replace traditional wires that use aluminum as conductors and are reinforced with steel. The transmission line, called C-7, uses a composite core of bundled strands made of Celstran long-glass fiber-reinforced thermoplastic combined with heat-resistant Fortron polyphenylene sulfide and is covered with a layer of PEEK (polyetheretherketone). The cable harness is housed in a sheath made of aluminum or aluminum-zirconium alloy. Celanese and Southwire Corp. introduced the lightweight composite wire earlier this year after seven years of development. Celanese demonstrated the application at the JEC Americas Composites Show in Atlanta in May. Benefits include reduced increase in sag…

2016-08-31 | Industry News, News | Tags:

Victrex PEEK polymer global price increase

On August 15, 2014, Thornton Cleveland, the high-performance polyaryletherketone solutions division of Victrex, announced that it would increase the price of its VICTREX polyaryletherketone polymer products by at least 6.8% from October 1, 2014 (or as required by the contract), to account for the rising costs of major raw materials such as hydroquinone and to compensate for the increased costs of energy, freight and inflation. As the cost of raw materials and labor increases, the company will control costs by reducing consumption, optimizing processing technology, etc. to minimize the impact on customers. PEEK (polyetheretherketone) has the advantages of high temperature resistance, wear resistance, corrosion resistance, self-lubrication, high strength, hydrolysis resistance, flame retardancy, radiation resistance, and dimensional stability. It is widely…

2016-08-31 | Industry News, News | Tags:

Solvay: A broad portfolio of medical-grade high-performance polymers PEEK and PPSU effectively meets market demand

Solvay Specialty Polymers, a supplier of high-performance thermoplastics for a range of market applications including implantable and non-implantable medical devices, will showcase its diverse portfolio of advanced materials for healthcare applications at the 10th China International Medical Equipment Design & Technology Exhibition (MEDTECC-hina) held at the Shanghai World Expo Exhibition & Convention Center from September 25 to 26, 2014. For long-term and lasting implants and short-term medical devices, Solvay’s high-performance plastics have high strength and lightweight product characteristics, outstanding design flexibility, easy processing, compliance with registration specifications, and the ability to distinguish different products and brands by color. Solvay’s global medical business team has always focused on the medical implant market (Solviva Biomaterials Series), the hemodialysis market, and various emerging…

2016-08-31 | Industry News, News | Tags:

PEEK’s high temperature resistance improves the performance of dental bite sticks
PEEK’s high temperature resistance improves the performance of dental bite sticks

When Dentronix, a subsidiary of the Swiss Coltene/Whaledent Group, was designing a new “heat-resistant” bite bar, it needed a material that could withstand the high temperatures of a dry heat sterilizer. The company chose PEEK, a high-performance polymer used in a variety of high-end medical applications, because of its good overall performance. Bite bars are orthodontic tools used to secure braces to teeth. The orthodontist places the braces on the patient’s teeth and then places the bite bar, which allows the metal insert to help the braces slide into the correct position when the patient bites down. Since bite bars mechanically secure braces to teeth, impact strength is important, and PEEK polymer meets the requirements for bite pressure. A requirement…

2016-08-31 | Industry News, News | Tags:

PEEK board and PEEK rod have the relevant characteristics and broad development prospects in the market
PEEK board and PEEK rod have the relevant characteristics and broad development prospects in the market

With the rapid development of science and technology economy, domestic industrialization has made great progress. The rise of various heavy industries and emerging industries has made the demand for materials more and more extensive, no longer limited to metal, steel, wood and other materials. Changzhou Junhua PEEK Co., Ltd. (website: http://en.junhuapeek.com) seized the opportunity under such a social situation and came into being. It is mainly engaged in the sales of special engineering plastics PEEK plates, PEEK rods and many other similar materials. The company seizes market opportunities and constantly adapts to market demand. In order to make everyone have a more comprehensive and thorough understanding of PEEK, the reporter interviewed Mr. Li, the person in charge of Changzhou Junhua…

2016-08-31 | Industry News, News | Tags: