PPS Test Socket

PPS Test Socket

IC test sockets (test sockets, test sockets) are important fixtures in semiconductor testing. They provide a reliable, mechanically stable connection point, allowing testers to test chips and check for manufacturing defects and component failures without the need for permanent soldering or mounting on circuit boards.

When IC chips are tested in single chip, a test socket with stable dimensions at high temperature and capable of withstanding thousands of contact frictions is required. IC test sockets made of PEEK/PPS material have the following advantages:

1. PEEK/PPS can withstand high static loads at high temperatures and has stable high bandwidth, low resistance and low inductance.

2. PEEK/PPS can maintain good dimensional stability in a wide temperature range, adapt to the working environment of -40℃ to 125℃, meet the testing requirements under various extreme conditions, and ensure the high-precision dimensional stability of the IC test socket during operation.

3. PEEK/PPS has high strength and ultra-high wear resistance. It can withstand tens of thousands of contact frictions of IC chips and ensure the reliability of IC test sockets.

With the development of technology, the transistor density of semiconductor chips is getting higher and higher, and the complexity and integration of related products are growing exponentially, which is an unprecedented challenge for chip design and development.

At the same time, as the chip development cycle shortens, the success rate of tape-out is increasingly required, and any failure is a huge loss for the company. In addition, the semiconductor process technology is constantly improving, and there are many technical challenges to face. Semiconductor testing runs through the entire IC industry chain.

Choosing the right test socket material is critical because it directly affects the accuracy and reliability of the test.

Material characteristics of different IC test sockets:

1. PEEK has good comprehensiveness and is the most commonly used material. It is suitable for high and low temperature environments, while PPS has slightly poor toughness.

2. TORLON has good wear resistance, but is not suitable for high and low temperatures, and is prone to water absorption and deformation;

3. PEEK5600 is used under ESD anti-static requirements;

4. PI has good toughness, strong resistance to voltage changes, resistance to water absorption, and high melting point, but it is expensive.

Junhua has been providing customers with high-performance, high-quality PEEK/PPS test sockets, helping customers to accurately measure parameters, optimize corresponding design solutions, and improve product production yield. It can customize various specifications and models of PEEK/PPS IC Sockets according to customer needs.

Since its establishment in 2007, Junhua Co., Ltd. has focused on the application research and development and production of polymer resins, profiles and products such as PEEK (polyetheretherketone) and PI (polyimide), and has advantages in the entire industrial chain .

The products are widely used in the electronic semiconductor, photovoltaic and LED industries, covering key links such as production equipment, cleaning, gluing, etching, CMP, dicing and packaging testing . The related products include: Wafer handing tools, PEEK vacuum seamless suction cups, PI customized parts, PEEK customized parts, wafer drag teeth, PEEK screws, nuts, gaskets, CMP PEEK retaining rings, electroplating selector rings, wafer brackets, IC test fixtures, PEEK insulating boards, PEEK boards/rods/tubes, PI boards/rods and other special engineering plastic products and profiles.

Relying on the advantages of the entire industrial chain, the company provides customized solutions for the high-tech industry and promotes industrial technological progress.