年份: 2024
65mm×62mm PEEK thin-walled tube
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
Φ62mm×38mmPEEK pipe
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
Φ86mm×Φ54mmPEEK pipe
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
27.5mm×13mmPEEK pipe
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
29mm×15mmPEEK pipe
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
260×220mmPEEK tube
Features and advantages 1. Applied to point-to-point terminal continuous electroplating, the plating layer can be precisely controlled through the PEEK plating ring…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
3mm continuous extrusion PEEK sheet
The main characteristics of PEEK sheet: 1: High temperature resistance. The long-term use temperature of UL certification in the United States is 260℃. Even if the temperature…
2024-07-20 | PEEK Shapes, PEEK Sheets, Products, Shapes | Tags: PEEK sheets
Φ50.56mm PEEK rod (red)
The main characteristics of PEEK rods: 1: High temperature resistance The long-term use temperature of the US UL certification is 260°C. Even if the temperature…
JHPI-10 Plate
PI board polyimide board is resistant to corrosion, radiation and rust. The long-term use temperature exceeds 300℃ and the short-term use temperature reaches 4…
2024-07-20 | PI Shapes, PI Sheets, Products, Shapes | Tags: PI profiles
Polyimide resin
Polyimide (PI) resin is a kind of high modulus, high strength, low water absorption, hydrolysis resistance, radiation resistance, excellent insulation…
2024-07-20 | PI granules, PI powder | Tags: PI profiles
PI (polyimide) rod
The long-term use temperature of PI material parts exceeds 300℃, and the short-term temperature reaches 400~450℃
2024-07-20 | PI Shapes, Products, Shapes | Tags: PI profiles