PEEK Aerospace Industry
Aerospace Industry
PEEK Filament
It is imperative to reduce weight and improve fuel efficiency.
High fuel costs and environmental protection become a major challenge.
Reduced production and faster assembly are critical.
Aircraft makers must keep pace with high demand.
Longer life and reliability needs.
Minimize aircraft maintenance while ensuring safety.
Among the aircraft materials, titanium alloy accounts for 15% and aluminum alloy accounts
for 20%.
The same size and volume, different material test blocks,
There is a huge difference in density.
PEEK Aerospace Materials
PEEK Enables Lightweight Alternative Metal Aerospace Materials
The use of lightweight PEEK material can not only improve fuel efficiency and meet
environmental requirements, but also make assembly faster and more reliable, and lower
operating and manufacturing costs. This is the trend in aerospace design.
Aerospace engineers need strong, lightweight materials that simplify part design, reduce
system cost, and provide durability in harsh environments. JUNHUA PEEK creates value for
customers through high-performance PEEK polymer solutions and is a domestic leader in this
field.
PEEK Parts
PEEK Parts Used in Aerospace Industry
PEEK5600G
Excellent processability and toughness, suitable for thin-walled products.
PEEK5600GF30
High strength and high modulus, suitable for pressure vessels or occasions with high-pressure requirements.
PEEK5600CF30
Carbon fiber reinforced PEEK with excellent mechanical properties.
PEEK5600LF30
With excellent wear resistance, it is suitable for high-speed, high-load applications.
Small Specific Gravity
Replacing titanium alloy (4.5g/cm3) and aluminum alloy (4.5g/cm3) to achieve lightweight.
High Wear Resistance
The melting point is 343°C, long-term use at 260°C, the thermal deformation temperature of the composite material is about 330°C and higher temperature resistance.
High strength
The mechanical properties of PEEK modified by chopped fibers are slightly lower than those of aluminum alloys.
Corrosion resistance
It has corrosion resistance to most organic solvents such as acids and alkalis. It is corroded by halogens and strong acids at high temperatures and is soluble in concentrated sulfuric acid at room temperature.
Thermoplastic material
Fatigue resistance and impact resistance are significantly better than thermoset materials, have a longer life, are environmentally friendly, and are recyclable.
Material stability
It better reflects the characteristics of low gas release in outer space and a vacuum coating environment.
Wearing resistance
High hardness and low friction coefficient.
Stable dimension
PEEK reduces the coefficient of expansion, thereby radically reducing the risk of swelling.
Contact us for more information and services.
Contact us Now, Get a Quote, Product Manual, Performance Parameters, Custom Solutions, Technical Consultation, and Samples for PEEK Materials!
CF-PEEK Composite
CF-PEEK Composite
Advanced composite materials play important roles in the aerospace field.CF/PEEK composite
materials have extremely high-heat resistance (heat deformation temperature up to 310℃),
corrosion resistance, friction resistance, and other advantages.
The composite material of CF/PEEK has very high mechanical properties, meanwhile has higher
impact resistance than traditional thermoset composites, which can be fabricated for
aircraft landing gear skin components, while reducing the weight of the aircraft.
CF-PEEK Composite
CF-PEEK Composite
Civil aircraft application
Airbus A340/A380 wing leading edges, and aircraft interior parts, including seat frames, brackets, beams, and intake ducts are also applied with PPS composites. PEEK composite materials are used for doors, windows, link corner pieces, etc. The application of main mechanisms, such as fuselage panels, wing boxes, and stringers, is still in the experimental stage.
PEEK Parts and Types
PEEK Parts and Types of Its Modification
PEEK-clamp-and-stand-offs
Material: PEEK5600GF30
The low hygroscopicity
of the PEEK polymer material ensures that the tie is dimensionally
stable so that it does not swell and not damage the insulation of
the wire.
Tubing system
Material: PEEK5600G
Aircraft fuel pump
hydraulic power supply protection for water/wastewater piping
systems, environmental control systems, and cable systems.
Insulating jacket
Material: PEEK monofilament
PEEK monofilament
can be used to weave heat-resistant filter weave, fuel filters,
artificial clamps, high-temperature insulation sheaths on aircraft,
etc.
Shell cover
Material: PEEK5600GF30
30% glass fiber
reinforced PEEK has good pressure resistance and heat insulation
properties, and low gas release.
JUNHUA PEEK Parts
JUNHUA PEEK Parts For Aerospace Industry
JHPI-10 Polyimide rod and sheet
Carbon fiber reinforced CF/PEEK thermoplastic composite
PEEK monofilament | PEEK fiber
Certificate
JUNHUA Focus on PEEK
JUNHUA PEEK Business Unit operates in a way that accelerates the deep plowing of PEEK downstream applications. JUNHUA PEEK currently has 6,000+ customers, and its revenue growth rate in 2021 exceeds 50%, of which the revenue growth rate in the medical field exceeds 80%. It is worth mentioning that JUNHUA medical division has become an independent subsidiary.18 + Years
Leading peek manufacturer since 2007.
70+ Countries
It is exported to the USA, Germany, South Korea, and more than 70 other countries and regions.
50,000+ Clients
After continuous accumulation, the total number of customers in various industries over 50,000.
500,000+ Products
Dig Industry demand, statistics have done 500000 kinds of PEEK parts and other products.
- Fast Delivery
- Efficiency & Cost-saving
- 24/7 Customer Service
- Life-long technical support
Contact
Contact Us
Fill the Form to Get a Quote, Product Manual, Performance Parameters, Custom Solutions, Technical Consultation, and Samples for PEEK Materials!