PEEK Tubing

The First China Manufacturer to Develop PEEK Tubing

PEEK Polymerization | Compounding| Extrusion | Compressed molding | Injection molding | Machining

Get a quote Request a sample
junhua

Contact Us Now and Enjoy a One-Stop Solution!

Get a Quote, Product Manual, Performance Parameters, Solutions, Technical Consultation, and Samples, Fill the Form to Contact Us Now!
Loading
Submission failed. Please contact us directly at chinapeek@chinapeek.com.
Thank you! We will get back to you shortly.
junhua

PEEK Tubing

Polyether ether ketone, or PEEK, is one of the highest performing polymer plastics available. This high-purity and high-temperature polymer has excellent dielectric properties, a very low coefficient of friction, and withstands the most rigorous physical and mechanical stresses.
JUNHUA ChinaPEEK manufactures PEEK tubing by extrusion，precision PEEK tubing are mainly used in HPLC and medical industry, all PEEK tubing is extruded in JUNHUA’s GMP standard clean room. JUNHUA ChinaPEEK can ensure OD & ID ±0.03mm tolerance in our standard extruded tubing. Colored PEEK tubing, color stripped PEEK tubing and special modified PEEK tubing is also available.

Main Advantages of PEEK Tubing

  • ● Good wearing performance with or without load
  • ● High service temperature(long term 260C
  • ● Good mechanical strength
  • ● Good chemical resistance & Hydrosis resistance
  • ● FDA approved
Want More Assistance
junhua
junhua
junhua
junhua
junhua
junhua
PEEK5600

PEEK5600G (unfilled PEEK or natural PEEK)

PEEK5600G is one of unfilled or natural PEEK.Outstanding chemical resistance and a high operating temperature (up to 250℃/480F) round out PEEK profile.PEEK5600G has excellent dimensional stability combined with high creep stability, ensuring the suitability of PEEK for the most sophisticated machined parts.

PEEK5600GF30

PEEK5600GF30 ( 30% glass fiber filled PEEK)

Compared with unfilled PEEK(PEEK5600G),this 30% glass fiber reinforced PEEK material(PEEK5600GF30) exhibits increased mechanical strength and high rigidity.Plus, improved creep strength and dimensional stability are delivered by the 30% glass fiber filled PEEK.

PEEK5600CF30

PEEK5600CF30 (30% carbon fiber filled PEEK)

PEEK5600CF30 is a 30% carbon filled PEEK material that is manufactured by JUNHUA PEEK. Its carbon fiber reinforcement supports the material a high level of rigidity. Carbon fiber reinforced PEEK demonstrates very high mechanical strength values.

PEEK5600LF30

PEEK5600LF30( HPV PEEK or bearing grade PEEK)

PEEK5600LF30 black is developed especially for bearing and sliding applications. HPV PEEK is based on a PEEK polymer that has been modified with 10% each of PTFE, graphite and carbon fibres. It combines the properties of a high-grade matrix material with special, wear-improving additives.

Want More Assistance

PEEK Solutions

PEEK Solutions

PEEK is widely used in a variety of industries. We offer our solution by provideing material (whether as raw material, semi-finished products or as precisely processed finished parts) and technical guidance based on our knowledge and experience. Our experts will always be happy to assist you with your industry and application.
junhua

Aerospace

Food

Mechanical

Medical

Oil and Gas

Semiconductor

Contact us for more information and services.

Contact us Now, Get a Quote, Product Manual, Performance Parameters, Custom Solutions, Technical Consultation, and Samples for PEEK Materials!

PEEK Tubing Typical Data

Item Standard Data Units
Color - Natural
Density ISO 1138 1.3±0.01 g/cm3
Water Absorption (25℃.24Hrs) ISO 62 0.05 %
Melting temperature ISO 11357 343 ℃
Distortion Temperature ISO 75-1/-2 163 ℃
Continuous service Temperature UL 74685 260 ℃
Thermal expansion coefficient ASTM D696 4.7*10-6 /K
Tensile Strength (23℃) ISO 527 100 MPa
Tensile modulus (23℃) ISO 527 3.8 GPa
Tensile Elongation (23℃) ISO 527 27 %
Bending Strength (23℃) ISO 178 163 MPa
Bending Modulus (23℃) ISO 178 3.5 GPa
Impact Strength(23℃) ISO 604 123 MPa
Lzod Impact Strength (No notched) ISO 180/U No Break kJ/m2
Poisson Ratio ISO 527-2 0.4
Rockwell Hardness GB3398.2 118
Flammability UL 94 (1.5 mm) V-0
Dielectric strength IEC 60243-1 18 KV/mm
Dielectric constant IEC 60250 3.2
Thermal Conductivity ISO 22007 0.28 W/(m·K)
Surface Resistance IEC 90093 1015 Ω
Want More Assistance

PEEK Tubing Stock Program

OD(mm) ID(mm)
0.5 0.3、0.4
0.6 0.3、0.4、0.5
0.7 0.3、0.4、0.5、0.6
0.8 0.3、0.4、0.5、0.6、0.7
0.9 0.3、0.4、0.5、0.6、0.7、0.8
1.0 0.3、0.4、0.5、0.6、0.7、0.8、0.9
1.1 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0
1.2 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1
1.3 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2
1.4 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3
1.5 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4
1.6 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5
1.7 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6
1.8 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7
1.9 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8
2.0 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9
2.1 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0
2.2 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1
2.3 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2
2.4 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2、2.3
2.5 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2、2.3、2.4
2.6 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2、2.3、2.4、2.5
2.7 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2、2.3、2.4、2.5、2.6
2.8 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2、2.3、2.4、2.5、2.6、2.7
2.9 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2、2.3、2.4、2.5、2.6、2.7、2.8
3.0 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2、2.3、2.4、2.5、2.6、2.7、2.8、2.9
3.2 0.3、0.4、0.5、0.6、0.7、0.8、0.9、1.0、1.1、1.2、1.3、1.4、1.5、1.6、1.7、1.8、1.9、2.0、2.1、2.2、2.3、2.4、2.5、2.6、2.7、2.8、2.9、3.0
5.0 4.15、4.25、4.35、4.55
10.0 8.0、7.0
12.0 10.0、11.0
1/16" 0.1、0.13、0.25、0.38、0.5、0.75、1.0、1.2
1/32" 0.25、0.5
1/8" 1/16"、0.5、0.75、1.0、1.2、2.0、2.2
Want More Assistance

Certificate

Certificate & Compliance

junhua
junhua
junhua
junhua
junhua
junhua
junhua

Certificate

JUNHUA Focus on PEEK Material

JUNHUA PEEK Business Unit operates in a way that accelerates the deep plowing of PEEK downstream applications. JUNHUA PEEK currently has 6,000+ customers, and its revenue growth rate in 2021 exceeds 50%, of which the revenue growth rate in the medical field exceeds 80%. It is worth mentioning that JUNHUA medical division has become an independent subsidiary.

18 + Years

Leading peek manufacturer since 2007.

70+ Countries

It is exported to the USA, Germany, South Korea, and more than 70 other countries and regions.

50,000+ Clients

After continuous accumulation, the total number of customers in various industries over 50,000.

500,000+ Products

Dig Industry demand, statistics have done 500000 kinds of PEEK parts and other products.

  • Fast Delivery
  • Efficiency & Cost-saving​​​​​​​
  • 24/7 Customer Service​​​​​​​
  • Life-long technical support
Want More Assistance

Contact

Contact Us

Fill the Form to Get a Quote, Product Manual, Performance Parameters, Custom Solutions, Technical Consultation, and Samples for PEEK Materials!